welcome iCShop!     服務時間:週一 ~ 週五 9:00~12:00 / 13:00~17:00
步進馬達-200 steps/rev,12V 350mA
步進馬達-200 steps/rev,12V 350mA
步進馬達-200 steps/rev,12V 350mA
步進馬達-200 steps/rev,12V 350mA

步進馬達-200 steps/rev,12V 350mA

NT$ 590


產品貨號

368031000808

品牌

原廠貨號

324

數量

  庫存量:1

運送方式

7-11取貨付款 郵寄(單一運費) 宅配 宅配貨到付款 外島郵寄 順豐快遞 順豐快遞貨到付款

規格內容說明

DESCRIPTION

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino(or other motor driver) and a wall adapter or lead-acid battery.

Some nice details include a ready-to-go cable and a machined drive shaft (so you can easily attach stuff). We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown (or Gray)
 

TECHNICAL DETAILS
    • 200 steps per revolution, 1.8 degrees
    • Coil #1: Red & Yellow wire pair. Coil #2 Green & Brown/Gray wire pair.
    • Bipolar stepper, requires 2 full H-bridges!
    • 4-wire, 12 inch leads
    • 42mm/1.65" square body
    • 31mm/1.22" square mounting holes, 3mm metric screws (M3)
    • 5mm diameter drive shaft, 24mm long, with a machined flat
    • 12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
    • 28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
    • 35 ohms per winding

Datasheet