welcome iCShop!     服務時間:週一 ~ 週五 9:00~12:00 / 13:00~17:00
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011
M5Stack 串列通訊擴展模組-M011

M5Stack 串列通訊擴展模組-M011

NT$ 405


產品貨號

368031600032

品牌

M5Stack

原廠貨號

M011

數量

  庫存量:9

運送方式

7-11取貨付款 郵寄(單一運費) 宅配 宅配貨到付款 外島郵寄 順豐快遞 順豐快遞貨到付款

商品簡介

COMMU 是M5Stack堆疊模組系列中的一款,通訊轉換模組,其內部集成了2個I2C接口、1個TTL接口、1個CAN接口、1個RS485接口,能夠滿足開發時遇到的各種通訊轉換需求。

默認連接:TTL - UART0,RS485 - UART2.ESP32允許引腳映射重分配,所以你可以將TTL或是RS485接口重新定義到其他引腳

商品特性

●支援IIC,TTL,RS485,CAN等多種通訊協議

商品規格


規格 參數
接口 I2C x2, CAN x1, RS485 x1, TTL x1
CAN 控制器 MCP2515-1/SO
RS485收發器 SP3485EN-L/TR
淨重 13.5g
產品尺寸 54.2x54.2x13 mm

文件下載

資料手冊

範例程序

Arduino IDE

請點擊查看Arduino範例程序

如何查詢I2C位址

操作流程

STEP 1. 將欲查詢的模組連接至Arduino UNO(附圖為腳位參考,實際請比對商品標示接線)

STEP 2. 開啟Arduino IDE並新增檔案

STEP 3. 貼入教學下方的範例文件,並上傳到Arduino UNO,即會開始掃描I2C位址

STEP 4. 開啟序列埠監控視窗,即可取得I2C位址

I2C掃描範例程式

/ ---------------------------------------------------------------- /
// Arduino I2C Scanner
// Re-writed by Arbi Abdul Jabbaar
// Using Arduino IDE 1.8.7
// Using GY-87 module for the target
// Tested on 10 September 2019
// This sketch tests the standard 7-bit addresses
// Devices with higher bit address might not be seen properly.
/ ---------------------------------------------------------------- /
#include //include Wire.h library
void setup()
{
Wire.begin(); // Wire communication begin
Serial.begin(9600); // The baudrate of Serial monitor is set in 9600
while (!Serial); // Waiting for Serial Monitor
Serial.println("\nI2C Scanner");
}
void loop()
{
byte error, address; //variable for error and I2C address
int nDevices;
Serial.println("Scanning...");
nDevices = 0;
for (address = 1; address < 127; address++ )
{
// The i2c_scanner uses the return value of
// the Write.endTransmisstion to see if
// a device did acknowledge to the address.
Wire.beginTransmission(address);
error = Wire.endTransmission();
if (error == 0)
{
Serial.print("I2C device found at address 0x");
if (address < 16)
Serial.print("0");
Serial.print(address, HEX);
Serial.println(" !");
nDevices++;
}
else if (error == 4)
{
Serial.print("Unknown error at address 0x");
if (address < 16)
Serial.print("0");
Serial.println(address, HEX);
}
}
if (nDevices == 0)
Serial.println("No I2C devices found\n");
else
Serial.println("done\n");
delay(5000); // wait 5 seconds for the next I2C scan
}
出貨清單
  • M5Stack 串列通訊擴展模組 x 1